Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router
Chapter 4: Configuration
41
Ethernet Client Filter
The Ethernet Client Filter supports up to 16 Ethernet network machines that helps you to
manage your network control to accept traffic from specific authorized machines or to restrict
unwanted machine(s) to access your LAN.
There are no pre-define Ethernet MAC address filter rules; you can add the filter rules to meet
your requirements.
Ethernet Client Filter: Default setting is set to Disable.
• Allowed: check to authorize specific device accessing your LAN by inserting the MAC
Address in the space provided or click . Make sure your PC’s MAC is listed.
• Blocked: check to prevent unwanted device from accessing your LAN by inserting the
MAC Address in the space provided or click . Make sure your PC’s MAC is
not listed.
The maximum number of client is 16. The MAC address is 6 byte long; it is presented only in
hexadecimal characters. The number 0 - 9 and letters a - f are acceptable.
Note: Follow the MAC Address Format xx:xx:xx:xx:xx:xx. Semicolon ( : ) must be included
Candidates: automatically detects devices connected to the router through the Ethernet. .
→ Active PC in LAN
