94
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
5
Tv, Av, M, C1, and C2 Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
4
P Mode
Adjusting the Flash Output
Still Images
Movies
Choose from the three ash levels in [ ] mode.
1
Enter [ ] mode.
● Set the mode dial to [ ].
2
Specify the ash mode.
● Press the [ ] button, choose [Flash
Control] on the [ ] tab, and then press
the [ ] button.
● In [Flash Mode], choose [Manual]
(
=
30).
3
Congure the setting.
● Raise the ash, press the [ ] button and
immediately turn the [ ] dial to choose
the ash level, and then press the [ ]
button.
● Once the setting is complete, the ash
output level is displayed.
[
]: Minimum, [ ]: Medium, [ ]:
Maximum
● You can also set the ash level by accessing MENU (
=
30)
and choosing [
] tab ► [Flash Control] ► [Flash Output].
● You can also access the [Built-in Flash Settings] MENU screen
(
=
30) as follows (except when an optional external ash is
mounted).
- When the ash is up, press the [
] button and immediately
press the [
] button.
● After you set the shutter speed or aperture value, the exposure
level may change if you adjust the zoom or recompose the shot.
● Screen brightness may change depending on your specied
shutter speed or aperture value. However, screen brightness
remains the same when the ash is up and the mode is set to [
].
● With shutter speeds of 1.3 seconds or slower, ISO speed is [
]
and cannot be changed.
● [ ]: Manual
● Calculation of standard exposure is based on the specied
metering method (
=
72).
