LCD Messages
9-26
Troubleshooting
9
MEMORY FULL
Cause 1 The machine's memory is full because the collate copy or function was set
when a large document is loaded.
Remedy Divide the document and copy each part separately.
If <MEMORY FULL> appears while scanning documents by using the ADF, the
document to be scanned stops in the ADF. In this case, follow the procedure in
"Removing Jammed Paper from the ADF," on p. 9-22 to clear the jammed paper
in the ADF.
Cause 2 You tried to reserve more than 10 copy jobs.
Remedy The machine can store up to 10 copy jobs in memory. Wait until the current copy
job completes, or use [Status Monitor] to delete the reserved copy jobs in
memory.
PREPARE NEW ∗ CART
Cause A toner cartridge need to be replaced soon.
Remedy Prepare a new toner cartridge to be replaced.
∗: indicates either "C", "M", "Y", or "K".
PREPARE NEW DRUM
Cause The drum cartridge need to be replaced soon.
Remedy Prepare a new drum cartridge to be replaced.
PRINT NOT GUARANTEED
CHECK ∗ CARTRIDGE
Cause The installed toner cartridge cannot guarantee the print quality.
Remedy Cartridges that have low toner or made by third party vendors may cause
machine malfunction. Install a new cartridge available from Canon.
∗: indicates either "C", "M", "Y", or "K".
