Photos
76
IMPORTANT
• Avoid the following actions while the
card access display ( ) appears on
screen, and when the CARD access
indicator is on or flashing. Failing to do
so may result in permanent data loss.
- Do not subject the camcorder to
vibrations or strong impacts.
- Do not open the memory card slot
cover and do not remove the memory
card.
- Do not disconnect the power source
or turn off the camcorder.
- Do not change the position of the
/ switch or the operating mode.
• The following may not be displayed
correctly.
- Images not recorded with this
camcorder.
- Images edited on or uploaded from a
computer.
- Images whose file names have been
changed.
Slideshow
1 Press .
2 Select ( ) [ SLIDESHOW] and
press ( ).
3 Select ( ) [START] and press
().
• Images are played back one after
another.
• Press to stop the slideshow.
Index Screen
1 Move the zoom lever toward W.
The still images index screen
appears.
2 Select ( , ) an image.
• Move the green selection frame to
the image you want to view.
• If you have a lot of still images, you
may find it easier to browse entire
index pages instead. Move the
zoom lever toward W to extend the
green selection frame to the whole
page, and move ( ) between
index pages. Move the zoom lever
toward T to return to moving
between single images.
3 Press ( ).
The index screen closes and the
selected image is displayed.
Magnifying Photos during Playback
During playback, still images can be
magnified up to 5 times.
1 Move the zoom lever toward T.
• The image is magnified by 2 times
and a frame appears indicating the
position of the magnified area.
SLIDESHOW
FUNC.
( 27)
FUNC.
FUNC.
( 26)
