79
dark the assist lamp may light up briefly
in order to enable the camcorder to
focus more accurately (AF-assist lamp).
You can also set [AF AST LAMP] to
[ OFF] so the assist lamp does not
light up ( 49).
- The camcorder may not be able to
focus even if the AF-assist lamp is on.
- The brightness of the AF-assist lamp
could be an inconvenience. Consider
turning it off in public places such as
restaurants.
Continuous Shooting and Exposure
Bracketing (Drive Mode)
Take a series of pictures of a moving
subject or record the same picture in 3
levels of exposure in order to choose
later the picture you like the best.
POINTS TO CHECK
Mode switch: P (except for the
[ FIREWORKS] recording program).
Options
Default value
( 26)
Maximum number of continuous shots
These figures are approximate and vary with the recording conditions and subjects.
The actual number of frames per second will be lower when (camcorder shake warning)
is displayed on the screen.
Number of frames (shots) per second
Normal speed 3 frames
High speed 5 frames
Using the flash 2.1 frames
Maximum number of continuous shots
60 images
[SINGLE]
Records a single still image.
[ CONT.SHOOT.] (Continuous Shooting),
[ HISPEED CONT.SHOOT. ]
(High-Speed Continuous Shooting)
Captures a series of still images as long as you
hold pressed down. For the number
of frames per second, refer to the sidebar on
page 79.
[ AEB] (Auto Exposure Bracketing)
The camcorder records a still image in three
different exposures (dark, normal, light in 1/2
EV steps), allowing you to choose the shot you
like the best.
FUNC.
(27)
Icon of the currently selected
Drive Mode
Desired option
PHOTO
FUNC.
FUNC.
