Operation
Q-Spot™ 460-LED User Manual Rev. 5 11
4. Operation
Description
Button Function
Exits from the current menu or function
Enables the currently displayed menu or sets the currently
selected value in to the current function
Navigates upward through the menu list and increases the
numeric value when in a function
Navigates downward through the menu list and decreases the
numeric value when in a function
You can set the Q-Spot™ 460-LED start address in the 001~512 DMX range. This
allows for the control of up to 36 products in the 14-channel PERSON1 mode. The Q-
Spot™ 460-LED works with any compatible DMX controller using standard DMX cables.
Carry out all the programming procedures indicated below from the control panel. Refer
to the Menu Map page to learn how the menu options relate to each other
· To go to an option in the Menu Level, press <MENU> repeatedly until the option
shows on the display. Press <ENTER> to select. This will take you to the first
programming level for that option.
· To select an option or value within the current programming level, press <UP> or
<DOWN> until the option shows on the display. Press <ENTER> to select. If there is
another programming level, you will see the next option or you will see the selected
value.
· To exit to the previous menu level, press <MENU>.
2. To change the current address, press <ENTER>.
a. Change the starting address (001~512).
b. Press
.
2. To change the current mode, press <ENTER>.
a. Select a DMX mode (PERSON1/PERSON2).
b. Press
.
