Operation
16 Q-Spot™ 460-LED User Manual Rev. 5
Menu Map
Main Level Programming Levels Description
Selects a starting DMX address
PERSON
Selects the 14-channel DMX mode
Selects the 11-channel DMX mode
SETTINGS
PERFORM
PT SPEED
Defines the pan/tilt speed
PAN INV
Defines the direction of pan function
TILT INV
Defines the direction of tilt function
OP SPEED
Defines the optics speed
BLACK D
Defines the move-in black delay
DIMMER
Slow (DIM4) to fast (DIM1) dimmer curves
DIM INV
Defines the direction of the dimmer function
DMXERROR
Save the last look when DMX signal is lost
All LEDs off when DMX signal is lost
DMXRESET
The DMX controller can reset the fixture
The control panel can reset the fixture
DISPLAY
Defines the amount of time the display backlight
is on
KEY LOCK
Activates the control panel password
HOMEPAGE
DMX
Sets the display to show only the DMX channel
when idle
NAME+DMX
Display what is programmed via CONTENT level
when idle
RANGE
000~255
Sets the pan start point (restricted range)
Sets the pan end point (restricted range)
Sets the tilt start point (restricted range)
Sets the tilt end point (restricted range)
DEFAULT
Sets unit back to default factory settings
SEND
Sends all settings of this product to all other Q-
Spot™ 460 LED products connected via
NO
