xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
DHCP Relay Option 60 Default Settings
This window allows the user to configure the DHCP Relay Option 60 Default servers. When there are no matching servers found
for the packet based on option 60, the relay servers will be determined by the default relay server setting. Similarly, when there is
no match found for the packet, the relay servers will be determined based on the default relay servers.
To view this window, click Administration > DHCP/BOOTP Relay > DHCP Relay Option 60 Default Settings, as shown
below:
Figure 2- 50. DHCP Relay Option 60 Default Settings window
The following parameters can be configured:
Parameter Description
Relay IP Address
Enter the specified IP address for the DHCP relay forward.
Mode
Use the pull-down menu to choose either Relay or Drop. When drop is specified, the packet
with no matching rules found will be dropped without further process. When relay is selected
the packet will be relayed based on the relay rules.
Click Add to add a new Relay IP Address entry. Click Apply to implement the changes. To remove any entry, click the
corresponding
button.
DHCP Relay Option 60 Settings
This window is used to configure option 60 relay rules on the Switch. Different strings can be specified for the same relay server,
and the same string can be specified with multiple relay servers. The system will relay the packet to all the matching servers.
To view this window, click Administration > DHCP/BOOTP Relay > DHCP Relay Option 60 Settings, as shown below:
Figure 2- 51. DHCP Relay Option 60 Settings window
To find a particular entry, enter the correct IP Address or String and click Search. Click the View All button to see all the entries
in the table at the bottom half of the window. To delete an entry, select it and click Delete. To delete all the entries, click Clear
All. To add a new entry click Add the following window will appear:
52
