Configuring Quality of Service
Defining General QoS Settings
Page 243
Defining Queues
The Queue Page contains fields for defining the QoS queue forwarding types.
To set the queue settings:
1. Click Basic Setup > Quality of Service > Global Parameters > Queue. The Queue Page opens.
Figure 160:Queue Page
The Queue Page contains the following fields:
• Strict Priority — Specifies whether traffic scheduling is based strictly on the queue priority.
• WRR — Assigns WRR weights to queues. This field is enabled only for queues in WRR queue mode. If a
queue is set to 0 weight, the queue is not operational and is effectively closed. Each queue has a weight
range, queues 1-3 have the range 0-255, and queue 4 has the range 1-255.
• WRR Weight — Assigns the specific WRR value to the Queue.
• % of WRR Bandwidth — Displays the amount of bandwidth assigned to the queue. These values are fixed
and are not user defined.
2. Select Strict Priority or WRR Fields.
3. Click . The queue settings are set, and the device is updated.
