Dynojet Research 224-4WD Manual

A SERVICE OF

next previous

Document #98210104 3 - 15

Setting Up the 224-4WD Grating

Step 1

Place the Grates on the motor side of the dyno so

the long lip is towards the drum. Secure the

grates to the dyno with (2) 3/8” x 3” truss head

bolts, but do not tighten yet.

Step 2

Place the Center Plate on the Grates and secure it

with (8) truss head bolts (the Center Plate is

secured to the dyno with (1) 3/8” x 3” truss head

bolt). When you have the front Grate Assembly

fitted, tighten down all the truss head bolts

.

Motor

Note: Refer to Appendix A, Figure 8 to

become familiar with the layout of the

grating.