A SERVICE OF

logo

UPS SETUP
EATON Powerware
®
9355 UPS (10/15 kVA) User’s Guide S 164201594 Rev C www.powerware.com
17
8. Reinstall the front cover removed in Step 5.
Hang the top edge of the cover on the cabinet first, then lower the
bottom edge and snap into place.
NOTE Be sure to support the front and back of the cabinet when rolling it off the pallet to
prevent tipping.
9. Slowly roll the cabinet toward the rear of the pallet. Once the pallet
tilts, continue rolling the cabinet down the pallet until the cabinet
touches the floor (see Figure 9).
If needed, adjust the leveling feet so that the cabinet will roll.
Figure 9. Unloading the Cabinet