Page 81
KINO-LX Motherboard
4.5.4 LCD Backlight Installation
To connect an LCD backlight (inverter) to the motherboard, follow the instructions below.
Step 1:
Step 1:
Step 1:
Step 1:
Connect the 5-pin connector end of the LCD backlight cable to the CN12 header
on the mothe
rboard. A keyed pin on the
connector prevents it from being
connected incorrectly.Step 0:
4.5.5 Power Connection
To connect the motherboard to a power supply, follow the instructions below.
Connect a 20-pin AT/ATX power connector from a power supply to the CN19
power connector on the motherb
oard. A keyed pin on the connector prevents it
from being connected incorrectly.Step 0:
4.5.6 LVDS LCD Installation
To connect a LVDS LCD to the motherboard, follow the instructions below.
Connect the 20-pin connector end of a TTL LCD cable to the CN13 miniature
crimping connector on the
motherboard. A keyed pin on the connector prevents
it from being connected incorrectly.Step 0:
4.5.7 TTL LCD Installation
To connect a TTL LCD to the motherboard, follow the instructions below.
Connect the 40-pin connector end of a TTL LCD cable to the CN11 miniature
crim
ping
con
necto
r on the
motherboard. A keyed pin on the connector prevents
it from being connected incorrectly.Step 0:
