Global Upholstery Co. 2801330 Manual

A SERVICE OF

next previous

Page 84

IEI

®

Technology, Corp.

KINO-LX Motherboard

Clear CMOS DESCRIPTION

Short 1 - 2 (Default) Keep CMOS Setup

Short 2 - 3 Clear CMOS Setup

Table 4-3: Clear CMOS Jumper Settings

4.6.2 LCD Voltage Select Jumper

WARNING:

Making the wrong setting on this jumper may cause irreparable damage to

both the motherboard and the LCD screen connected to the on-board

connector.

Jumper Label:

JP3

Jumper Type: 3-pin header

Jumper Settings:

See Table 4-4

Jumper Location:

See Figure 4-3

This jumper allows the user to set the voltage for the LCD panel. Before setting this jumper

please refer to the LCD panel user guide to determine the required voltage. After the

required voltage is known, make the necessary jumper setting in accordance with the

settings shown in Table 4-4.

JP3 DESCRIPTION

Short 1-2 (Default) Panel Voltage select 3V

Short 2-3 Panel Voltage select 5V

Table 4-4: LCD Voltage Setup Jumper Settings