3.5 MAKING A NEW SCAN SEQUENCE, CONTINUED
Before the next camera can be selected, we have to make room in the sequence list.
Press the
key to insert a new entry into the scan sequence. Press to move
to this NEW ENTRY.
Now the next camera for this sequence can be selected.
• for example,
.. selects camera number 12 as
the second camera in scan sequence 20.
The entire procedure can be summarized as follows:
•
.. selects scan sequence 20, and starts it
scanning.
•
pauses scan sequence 20.
•
puts you in the 'SET SCAN' mode.
• press this key several times until the message
appears.
•
.. selects camera number 2 as the first entry of
scan sequence 20.
• creates a new entry for scan sequence 20.
• .. moves you to the second entry of scan sequence 20.
• .. selects camera number 12 as the second
entry of scan sequence 20.
Rev. A 3-6 HMXMU001056
03/16/05
