Troubleshooting
March 2001 2-7
702 Patch _patch_ has a spread
of _spread_ which is out of
range _range_.
The spread between colors for a
given density patch is out of
tolerance.
Perform another calibration cycle.
703 CalToleranceFile can only be
initialized once.
An internal error occurred with the
software.
• Restart the application.
• If problem continues, call for
service.
704 CalToleranceFile::
initialize must be called first.
An internal error occurred with the
software.
• Restart the application.
• If problem continues, call for
service.
801 Could not find row:_row_. An internal error occurred with the
software.
• Restart the application.
• If problem continues, call for
service.
802 Could not find
column:_column_.
An internal error occurred with the
software.
• Restart the application.
• If problem continues, call for
service.
803 Could not find element -
column:_column_.
row:_row_.
An internal error occurred with the
software.
• Restart the application.
• If problem continues, call for
service.
804 Row value was not set
before using.
An internal error occurred with the
software.
• Restart the application.
• If problem continues, call for
service.
805 Column value was not set
before using.
An internal error occurred with the
software.
• Restart the application.
• If problem continues, call for
service.
806 Error deleting row:_row_. An internal error occurred with the
software.
• Restart the application.
• If problem continues, call for
service.
807 Element at row:_row_;
column:_col_
value:_val_ failed audit.
An input file had incorrectly
formatted data in it at the location
indicated.
• Verify that you are using the
correct file.
• Edit the file and correct the
format.
Code Status Message Possible Cause/Subsystem Possible Solution
