A-61133 March 2003 D-7
Explanation of settings (see the illustration that follows)
1. Scan Area:
• When Primary is selected, the same image processing settings
will be applied to both front and back.
• When Film View is selected, the image processing settings will be
applied in the Select Overscan and Duplex Processing dialog
boxes as well as in the Image pane.
• When Front is selected, the image processing settings are
applicable to the front side image only.
• When Back is selected, the image processing settings are
applicable to the back side image only.
2. Duplex Processing: Duplex Processing must be enabled.
3. Resolution: Enhanced will provide the best image quality.
4. Sharpening:
• Photo & Text provides the best clarity for front side images since
they usually contain non-text information.
• Text provides the best clarity for back side images since they
usually contain text only.
5. Rotate: displays the images right side up.
6. Border: provides consistent border removal to accommodate varying
sized checks.
7. Film Image Quality: improves the contrast of the image.
8. Overscan: scans the specified number of images before and after the
image requested to accommodate poor image alignment within the
film frame.
