A SERVICE OF

logo

Open as PDF
next previous
5: Commands and Levels
EDS-MD Command Reference 65
kill ssh <session>
Kills SSH session with index from "show sessions"
kill telnet <session>
Kills Telnet session with index from "show sessions"
query port
Enters the query port level.
rss
Change to menu level for RSS configuration and status
rtc
Change to menu level for Real Time Clock configuration and
status
show
Displays system information.
show history
Displays the last 20 commands entered during the current CLI
session.
show lines
Displays line information.
smtp
Changes to the command level for SMTP configuration and
status.
syslog
Enters the syslog level.
terminal <line>
Enters the configure-terminal level.
<line> = number of the terminal line (serial port) to be confi-
gured.
terminal network
Enters the configure-terminal level for the network.
vip
Change to menu level for VIP configuration and status
write
Stores the current configuration in permanent memory.
connect (tunnel-connect:8) level commands
block network disable
Forwards (tunnels) network data in connect mode tunneling.
block network enable
Discards all data coming in from the connect mode tunnel be-
fore forwarding
it to the serial interface (generally used for debugging).
block serial disable
Forwards (tunnels) serial data in connect mode tunneling.
block serial enable
Discards all data coming in from the serial interface before
forwarding
it to the connect mode tunnel (generally used for debugging).
clrscrn
Clears the screen.
connect mode always
Enables the tunneling server to always establish tunneling con-
nections.
connect mode any character
Enables the tunneling server to establish a tunneling connec-
tion when a
character is received on the corresponding line (serial port).
connect mode disable
Disables connect mode tunneling.
connect mode modem control asserted
Enables the tunneling server to make tunneling connections
when the modem
control pin is asserted.
connect mode modem emulation
Enables modem emulation for connect mode tunneling.
connect mode start character
Enables connect mode tunneling when the configured start
character
is received on the line.
default connect mode
Restores the default connect mode as "disable".
default host mode
Connects to the first host in the list that accepts the connec-
tion.
default local port
Uses a random port number as the local port for establishing
tunneling
connections to other devices.
default reconnect time
Restores the default reconnect time value for connect mode
tunneling.