A SERVICE OF

logo

138
FX3G/FX3U/FX3UC Series Programmable Controllers
Programming Manual - Basic & Applied Instruction Edition
4 Devices in Detail
4.10 Extension Register [R] and Extension File Register [ER]
4.10.8 Registration of data in extension registers and extension file registers
This subsection explains the operating procedures of GX Developer (Ver.8.72A or later).
For details on GX Developer operating procedures, refer to the GX Developer manual.
1 Starting up GX Developer (GPPW)
Click [Start]-[All Programs]-[MELSOFT Application]-[GX Developer] in Microsoft Windows.
2 Setting the PLC model
Set the PLC Series and PLC type as shown below.
*1. For Ver. 8.13P to 8.24A of GX Developer, the PLC type is FX3UC.
Essential set item Contents of setting
PLC series FXCPU
PLC Type
FX3U(C)
*1
, FX3G
*1