A SERVICE OF

logo

60
FX3G/FX3U/FX3UC Series Programmable Controllers
Programming Manual - Basic & Applied Instruction Edition
2 Overview (Sequence Program)
2.7 Types and Setting of Parameters
8 Setting positioning
The positioning setting function is available in all FX3G PLCs and FX3U/FX3UC PLCs Ver. 2.20 or later.
1. Click "Positioning" tab.
"Positioning" tab is displayed when a check mark is put to "Positioning" on "Memory capacity"
tab.
2. Set the positioning constants in TBL (FNC152) instruction.
For TBL (FNC152) instruction, refer to the Positioning Control Manual.
This example shows a window in
an FX
3U/FX3UC PLC.