123
Copying Network Profiles to the Camera / Ad Hoc Networks
Uploading Images to an ftp Server
9 Enter the following information and click [Next].
• Network name (SSID): Enter a network name or choose from a
list of existing networks. Do not change the name if it is
supplied automatically.
• Communication mode: Select [Ad hoc].
• Channel: Select a channel. Note that if a matching SSID is
detected on a different channel, the WT-4 may change the
channel automatically.
• Authentication: Choose the type of authentication used on the
network. In ad-hoc mode, the camera supports open system
and shared key authentication.
• Encryption: The type of encryption used on the network.
Choose from [None] (open networks only), 64-bit WEP, and
128-bit WEP.
• Encryption key: If the network uses encryption, enter the
network key. The number of characters required depends
on the type of key used:
• Key Index: If [WEP64] or [WEP128] is selected for [Encryption],
choose a key index (the default index is [1]).
A key index is
not required when [None] is selected.
WEP (64-bit) WEP (128-bit)
Number of characters (ASCII) 513
Number of characters (hex) 10 26
