Configuring the Network / Macintosh / Connecting to an Infrastructure
Introduction 45
6 Enter the network name and other settings for the wireless
access point and click [OK].
• Network Name: Enter a name of up to 32 characters.
• Wireless Security: Choose from [None], [WEP Password], [WEP
40/128-bit hex], [WEP 40/128-bit ASCII], [WPA Personal], and
[WPA2 Personal]. [LEAP], [WPA Enterprise], [WPA2
Enterprise], and [802.1X WEP] can not be used with the
WT-4.
• Password: If WEP or WPA encryption is enabled, enter a
security key. The length of the key depends on the option
selected for [Wireless Security]:
❏ [WEP Password]: Enter a five- or thirteen-character key.
❏ [WEP 40/128 bit (hex)]: Enter a 10- or 26-digit hexadecimal
key. Hexadecimal keys may contain only the numbers 0–9
and the letters a, b, c, d, e, and f.
❏ [WEP 40/128 bit (ASCII)]: Enter a five- or thirteen-character key.
❏ [WPA-Personal], [WPA2-Personal]: Enter a key of 8 to 63
characters.
