A SERVICE OF

logo

To use the engine block heater:
1. Turn the engine off.
2. Openthe hoodand unwrapthe engineblock
heater cord.
3. Plug the engine block heater cord into a
grounded 3-wire, 3-pronged extension
cord.
4. Plug the extension cord into a Ground Fault
Interrupt (GFI) protected, grounded 110-
volt AC (VAC) outlet.
5. The engine block heater must be plugged in
forat least2-4hours,depending onoutside
temperatures, to properly warm the engine
coolant. Use an appropriate timerto turn the
engine block heater on.
6. Before startingthe engine,unplug and prop-
erly store the cord to keep it away from
moving parts.
5-38 Starting and driving