Section 700 - Operation Chapter 5. DSLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 5-31
2. Dial the desired extension number.
3. Upon hearing busy tone, press “5.”
To transfer a call using OHVA
1. Press the
HOLD
key.
2. Dial the number of the extension to which the call will be transferred.
Your phone issues a busy tone if the extension is already on a call.
3. Press “5” and announce the call to be transferred.
If the transferred call is not accepted by the called extension, press the
FLASH
key to cancel the transfer.
4. Press “8.”
5. Replace the handset.
To answer the call from a DSLT:
1. Press
CONF
to speak with the announcing party.
2. Press
CONF
again to disconnect the announcing party and return to the
original call.
Related Programming
• FF1 (System): Onhook (Automatic) Transfer
• FF1 (System): Alert Tone for Busy Override & OHVA
• FF1 (System): Extension Class of Service Setting (CPC-AII and CPC-B
3.1 or higher)
• FF3 (Extension): Extension Class of Service Assignment (CPC-AII and
CPC-B 3.1 or higher)
• FF3 (Extension): Call Waiting/OHVA
Considerations
• If Onhook Transfer is enabled, the held call is transferred as soon as the
extension sending the OHVA hangs up.
