Chapter 3. System Features Section 700 - Operation
Page 3-24 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
Direct Trunk Access
(All Versions)
Description
Extensions can access a specific trunk for outgoing calls. Extensions can also
use Direct Trunk Access to test trunks or to access data trunks.
Operation
1. Press the
ON/OFF
key:
• The phone issues intercom dial tone.
• The
ON/OFF
LED lights.
2. Dial “88,” then enter the desired line number (01-64).
• The phone issues outside dial tone.
• “CO TALK #XX” (where “XX” is the line number) appears on the
display.
3. Dial the telephone number.
The number appears on the display.
4. Complete the call and replace the handset.
Distinctive Ringing
(CPC-AII and CPC-B Version 3.1 or higher)
Description
Distinctive trunk call ringing patterns can be set up for each extension using
the Distinctive Ringing feature. Distinctive Ringing allows users to determine
which extension is ringing when several telephones are in the same area. If no
distinctive ringing pattern is set, the extension rings based on the incoming
ring pattern assigned to the trunk.
Related Programming
• FF3 (Extension): Extension Ring Pattern
