
5. Copier
42
3 Press {V} or {^} repeatedly to select “N in 1”. i
{Set}
4 Press {V} or {^} repeatedly to select the desired
page layout.
– “2 in 1 (Portrait)”
– “2 in 1 (Landscape)”
– “4 in 1 (Portrait)”
– “4 in 1 (Landscape)”
– “8 in 1 (Portrait)”
– “8 in 1 (Landscape)”
5 {Set}
6 If necessary, enter the number of copies (page 37).
L Other copy settings are also available. See page
37 for details.
7 When using the scanner glass:
1. {Start}
L The unit will scan 1 page.
2. Place the next document on the scanner glass
and press {Set}. Repeat this until all the
documents are scanned.
L The unit will start copying.
L You can press {Start} anytime to start
copying.
When using the automatic document feeder:
{Start}
8 After you finish copying, press {Stop} to reset this
feature.
Note:
L You can save the previous page layout setting
(feature #467 on page 73).
Separate N in 1 feature (Scanner glass only)
You can separate an N in 1 copied document back into
its original, separate pages. This feature is available for
documents created using the “2 in 1” and “4 in 1”
settings.
1. Set the original (page 21).
2. Press {V} or {^} repeatedly to select “Page
Layout”. i {<}/{>}
3. Press {V} or {^} repeatedly to select “Separate N
in 1”. i {Set}
4. Press {V} or {^} repeatedly to select the desired
page layout.
– “2 in 1 (Portrait)”
– “2 in 1 (Landscape)”
– “4 in 1 (Portrait)”
– “4 in 1 (Landscape)”
5. {Set}
6. If necessary, enter the number of copies (page 37).
L Other copy settings are also available. See page
37 for details.
7. {Start}
8. After you finish copying, press {Stop} to reset this
feature.
5.2.6 Booklet feature
You can make copies, and then fold them in half to create
booklets. The documents will be reduced to fit the
recording paper.
1 Set the original (page 21).
2 Press {V} or {^} repeatedly to select “Page
Layout”. i {<}/{>}
3 Press {V} or {^} repeatedly to select “Booklet”.
i {Set}
4 Press {V} or {^} repeatedly to select the desired
binding direction and pages.
– “Left Binding(1)”
– “Left Binding(All)”
– “Right Binding(1)”
– “Right Binding(All)”
L “(1)”: To make a booklet with every 4
documents printed as separate blocks.
L “(All)”: To make a booklet with all documents
printed as 1 block.
5 {Set}
6 If necessary, enter the number of copies (page 37).
L Multiple copies will be collated automatically.
L Other copy settings are also available. See page
37 for details.
7 When using the scanner glass:
1. {Start}
L The unit will scan 1 page.
2. Place the next page on the scanner glass and
press {Set}. Repeat this until you have scanned
all pages.
3. If “Left Binding(1)” or “Right
Binding(1)” is selected in step 4, the unit will
start copying.
L You can press {Start} anytime to start
copying.
L For multiple copies, press {Start} to start
copying.
If “Left Binding(All)” or “Right
Binding(All)” is selected in step 4, press
{Start} to start copying.
When using the automatic document feeder:
{Start}
8 After you finish copying, press {Stop} to reset this
feature.
Note:
L You can save the previous page layout setting
(feature #467 on page 73).