9. Programmable Features
66
Setting the default operation
mode
{#}{4}{6}{3}
To select the default operation mode when the selected time of the mode timer
(feature #464) passes.
{1} “Copy” (default): Copy mode is selected as default.
{2} “Fax”: Fax mode is selected as default.
Note:
L You cannot select the scan mode using this feature.
Setting the default operation
mode timer
{#}{4}{6}{4}
To set the timer before returning to the default operation mode (feature #463).
{0} “Off”: Deactivates this feature.
{1} “30s”: 30 seconds
{2} “1min” (default): 1 minute
{3} “2min”: 2 minutes
{4} “5min”: 5 minutes
Setting toner save feature
{#}{4}{8}{2}
{0} “Off” (default): Deactivates this feature.
{1} “On”: The toner cartridge will last longer.
Note:
L This feature may lower the print quality by reducing toner consumption.
L This setting is valid for copying, and when the unit automatically prints
reports/lists.
L This setting is invalid for printing received faxes.
Viewing the counter
{#}{4}{8}{4}
To confirm the count number of prints.
1. {Menu} i {#}{4}{8}{4}
2. {Set} i {Menu}
Feature/Code Selection
