A SERVICE OF

logo

Registering the PS
The PS must
be registered to the PBX before it can be used. Programming of both the PS and PBX is required.
A PT with multiline display (e.g., KX-T7636 6-line display) is required to perform the PBX system programming.
Note
For details about system programming using a PT, refer to "2.3.2 PT Programming" in the Feature
Guide, and "2.1 PT Programming" in the PT Programming Manual.
Entering the System Programming Mode
PT (Administrator Level)
#
= 1234
System Password for Administrator—
for PT Programming
Programming No.
3 digits
PROGRAM/
PAUSE
PS (Using the KX-TD7684/KX-TD7694)
Press POWER
for 2 seconds.
Select
"Setting Handset".
Select
"System Option".
If required
4 digits
System Lock Password
System Setting Menu
PS (Using the KX-TD7680)
System Setting Menu
Select
"SYSTEM SET".
Press POWER
for 2 seconds.
Select
"PS PROGRAM".
4 digits
System Lock Password
If required
FUNC
FUNC
PS (Using the KX-TD7690)
System Setting Menu
Select
"SYSTEM SETTING".
Press POWER
for 2 seconds.
S1 S1
MENU SEL
S1
SEL
Select
"PS PROGRAM".
4 digits
System Lock Password
If required
ENTR
S1
Note
means default value throughout this section.
Installation Manual 201
2.9.7 Connecting a Cell Station to the PBX