2.2.12 Wall Mounting (KX-TDA100)
WARNING
• Make sure that
the wall the shelf will be attached to is capable of supporting at least 4 times the
weight of the shelf.
• Only use the wall-mounting equipment (anchor plugs, screws, metal bracket) included with the
PBX.
CAUTION
• When placing the metal bracket, make sure that the "TOP" arrow is pointing upward.
• Do not block
the openings of the shelf. Allow space of at least 20 cm above and 10 cm at the sides of
the shelf.
• Make sure that the surface behind the shelf is flat and free of obstacles, so that the openings on the
back of the shelf will not be blocked.
• Make sure that the surface behind the shelf is not made of wood.
Notice
• When driving the
screws into the wall, be careful to avoid touching any metal laths, wire laths or metal
plates in the wall.
• When this product is no longer in use, make sure to detach it from the wall.
• Be careful not to drop the shelf.
1. Install 3 anchor plugs in the wall, using the metal bracket as a template. Fix the metal bracket with 3 screws
(A).
TOP
30 mm
8 mm
TOP
Metal Bracket
Screw (A)
Anchor Plug
Screw (A)
Metal Bracket
Hammer
Anchor Plug
Wall
Installation Manual 67
2.2.12 Wall Mounting (KX-TDA100)
