A SERVICE OF

logo

PS Termination
Confirm the following before cancelling the PS registration:
The PS is turned on.
The PS is within range.
[691]
001 to 128
PS No.
ENTER ENTER
END
(HOLD)
If "Rejected" or "Time out" is displayed
CLEAR YES
Press "YES".Press "CLEAR".
If "Rejected" or "Time out" is displayed
The registration information is still stored in the PS. You need to delete the registration information from the
PS.
Using the KX-TD7685/KX-TD7695
Select the desired
base (Base 1–4).
Select "Yes".
C.Tone
Select
"Cancel Base".
Press POWER
for 2 seconds.
Select
"Setting Handset".
Select
"System Option".
If required
4 digits
System Lock Password
Testing the Operation
Walk around the service area while having a conversation using a registered PS. If noise is frequent or
conversations disconnect, relocate the CSs or install an additional CS.
234 Installation Manual
2.10.7 Connecting a Cell Station to the PBX