RealPresence Collaboration Server 800s Administrator’s Guide
H-10 Polycom, Inc.
The whole procedure may take 15 minutes. When the installation completes, the system
reboots.
When the system reboots the DVD is ejected.
8 Remove the DVD from the server and close the DVD drive.
Completing the System Configuration
To complete the system configuration:
9 Connect to the MCU using the default Polycom user name and Polycom password. For
details, see the RealPresence Collaboration Server 800s Getting Started Guide
, "Procedure 3:
Connection to MCU” on page 2-9
.
10 Enter the activation key.
11 Define the IP Network Service for the media and signaling using the Fast Configuration
Wizard. For details, see the RealPresence Collaboration Server 800s Getting Started Guide
,
"Fast Configuration Wizard” on page 2-11.
12 Optional: Restore the system configuration. For details, see "Software Management” on
page 20-41.
13 Remove the USB memory stick from the RealPresence Collaboration Server.
The system recovery is complete.
