A SERVICE OF

logo

Open as PDF
next previous
15
After the iSCSI initiator logs into the newly presented LUN, the iSCSI Initiator Properties Targets page
(see Figure 12) shows the target status as Connected.
Figure 12. iSCSI Initiator Properties: Target Connected
Now, when you select your iSCSI initiator in the left pane of the SANsurfer Router Manager window,
the Information page shows the status as Logged In. The LUN List page (Figure 13) shows the LUNs
mapped to that initiator.
Figure 13. LUN List Page
Step 10. Configure Second Blade (if provided)
To configure a second blade (if provided), repeat Step 9. Use Table 2 on page 5 to build the blade option configuration.