18
HW Version 31895-03 A
SW Version 3.2.0.0rc6b2
Temp (Front/Rear/CPU1/CPU2) 35C/25C/31C/33C
Power Cooling Module 2
----------------------
Status Installed
Power Source Not Connected
Fan1/Fan2/Fan3 Healthy/Healthy/Healthy
iSR6200 #>
Using the GUI to Locate the Serial Number
The following shows how to locate the serial number using the SANsurfer Router Manager utility provided by QLogic.
Refer to the iSR6200 Router Manager User’s Guide for specific information regarding the management utility.
To find the serial number of your blade from SANsurfer Router Manager, follow these steps:
1. In the SANsurfer Router Manager’s left pane, click the Router tab.
2. In the left pane’s router tree, click Blade 1.
3. In the right pane on the Information page, locate and write down the Serial Number shown under
Basic Information (see Figure 14).
4. Repeat the preceding steps to determine the Blade 2 serial number.
Figure 14. Locating the Blade Serial Number in the GUI
