29
cameras, but if the motion is detected on Camera #1, the sequence to scan #1 camera will be
more frequently. It will be scanning as 1st, 2nd, 1st, 3rd, 1st, 4th...1st, 9th.
The motion-detected camera will be scanned more frequently, which will be one after another
camera been detected. If 2nd camera and 3rd camera both motion detection are activated, they
will be scanning as 1st, 2nd, 3rd, 2nd, 2nd, 3rd, 3rd, 2nd, 3rd, 4th, 2nd, 3rd....3rd, 9th, 2nd, 3rd
and vice versa.
2). Recorded Video - more frequently video will be recorded for the motion detected cameras,
function same as Live video in the above mentioned.
Basically, the motion detection will show while in live mode on monitor. When motion trigger
record setting is ON, it can automatically switch from stand-by mode to activate Record Mode.
Figure 1 MOTION DETECTION SETUP
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
032
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Figure 1-1 MOTION DETECTION SETUP – 1~16
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
032
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Figure 1-2 MOTION DETECTION SETUP –
LINE
