6
2.4 RS232 Remote Protocol
You can use the PC keyboard to simulate DMR keypad.
DATA: REMOTE PROTOCOL using 8 bit data
、
1 start bit
、
1stop bit
ACT C0H ID FUNCTION STOP
(FFH) (7FH)
FUNCTION
FUNCTIONFUNCTION
FUNCTION
CODE
CODECODE
CODE
AS
ASAS
ASC
CC
CII
IIII
II
FUNCTION
FUNCTIONFUNCTION
FUNCTION
CODE
CODECODE
CODE
AS
ASAS
ASC
CC
CII
IIII
II
KEY_MENU 0x4D M KEY_CH1 0x31 1
KEY_SELECT 0x73 s KEY_CH2 0x32 2
KEY_ENTER 0x0D ENTER
KEY_CH3 0x33 3
KEY_4CUT 0x61 a KEY_CH4 0x34 4
KEY_ZOOM 0x5A Z KEY_CH5 0x35 5
KEY_9CUT 0x62 b KEY_CH6 0x36 6
KEY_PIP 0x70 p KEY_CH7 0x37 7
KEY_16CUT 0x63 c KEY_CH8 0x38 8
KEY_SLOW 0x53 S KEY_CH9 0x39 9
KEY_REC 0x72 r
KEY_LEFT 0x4C L
KEY_UP 0x55 U
KEY_PLAY 0x50 P
KEY_DOWN 0x4E N
KEY_RIGHT 0x52 R
KEY_POWER 0x57 W
KEY_KEY_LOCK 0x4B K
3. Configuration
3.1 Install HDD
3.1.1 Installing Hard Drive into Cartridge
3.1.1.1. Please find the Key in the Cartridge.
3.1.1.2. Push the front cover of the HDD cartridge and use the miniature key
provided and insert into the key hole, turning the key counter-clockwise.
3.1.1.3. Pull the handle outwards to remove the carrier body away from the cartridge
frame.
3.1.1.4. Push the open button to slide the top cover backwards and remove.
3.1.1.5. Insert the DC power cable and IDE cable on the HDD.
3.1.1.6. Position the HDD into carrier body and secure the HDD with the four 6#-32
screws provided.
3.1.1.7. Slide the top cover back to the carrier body by sliding it forward to secure.
3.1.1.8. Slide the carrier body back into the cartridge frame.
3.1.2 Function Settings and Operation
3.1.2.1 Power Indicator and HDD Access indicator
When power is on, the indicator will display the following message
：
