Preparation _07
01 PREPARATION
7
Ethernet Port
Ethernet cable port.
8
Power Port
Connect the power cable to this port.
LED
Status
Description
SYSTEM
Turns on
When the power is switched on and the
network connection is normal.
Flashes
When the DDNS setting fails.
When the DDNS is being set.
When the network connection is not
stable.
Turns off
When the power is switched off.
When the camera is rebooting.
SD
Turns on
When the memory card is inserted and
the system is in normal operation.
Flashes
When recording fails.
When the memory card is short of
capacity.
When the memory card is not inserted
normally.
Turns off
When the power is switched off.
When the camera is rebooting.
When the memory cared is removed.
PWR
Turns on When the power is switched on.
Turns off When the power is switched off.
NA-M300-ENG_AB68-00721A.indd 7 2008-11-17 오후 5:33:03
