Setting Up
_39
07 SETTING UP
BASIC CONFIGURATION
To setup Video/Audio
You can set the video resolution, quality, frames per second, and input gain.
1
Click <BASIC>
<VIDEO & AUDIO>
.
The VIDEO & AUDIO window appears.
2
To complete the video setting,
click the [Apply] button.
The settings are saved.
You will not be able to hear the audio
data if the audio input gain is at zero.
<Resolution>: Select a video size from the options shown below.
MJPEG: QXGA(2048x1536), UXGA(1600x1200), SXGA(1280x1024)
MPEG: VGA(640x480)
<Quality>: Select a video quality level between 0 and 10.
<Frame Rate>: Select a frame rate.
MJPEG: QXGA(12ips, 6ips, 3ips, 1ips, Auto), UXGA(19ips, 10ips, 5ips, 1ips, Auto),
SXGA(25ips, 13ips, 6ips, 1ips, Auto)
MPEG: QXGA(12ips, 6ips, 3ips, 1ips, Auto), UXGA(19ips, 10ips, 3ips, 1ips, Auto),
SXGA(25ips, 13ips, 3ips, 1ips, Auto)
<Input Gain>: Select the audio amplification level between 0 and 10
If the frame rate of MJPEG is at its maximum value, the frame rate of MPEG can only be set to
3 ips or 1 ips.
NA-M300-ENG_AB68-00721A.indd 39 2008-11-17 오후 5:33:08
