Network Connection & Setup
_21
03
NETWORK CONNECTION & SETUP
1 2 3 4 6
7 8 9 10
5
1
Device Name : Model name of the connected device.
2
Mode : Shows the current selection between <Static>and <Dynamic>.
3
Mac Address : The Mac address of the network interface of the camera that is printed
on the rear panel.
4
IP Address : The IP address of the camera. (Default setting is '192.168.1.200'.)
5
UPnP Status : This is unavailable for this camera.
6
URL : This is DDNS address that can be used to connect from an external Internet.
However, if the DDNS update fails, it will be displayed as an IP address of the
camera.
7
Search Button : Searches for the camera connected to the current network.
8
Auto Set Button :
Sets up the camera network settings automatically using the
<IP Installer>.
9
Manual Set Button : Allows the user to set up the camera network settings manually.
10
Exit Button : Exits the IP Installer program.
On Windows Vista, the settings should be configured by the Administrator to use the IP installer
normally.
SEARCHING FOR THE CAMERA
IP Installer screen layout
NA-M300-ENG_AB68-00721A.indd 21 2008-11-17 오후 5:33:05
