86
Chapter 6 Using the Library Administration Menu
7
When the AIT library has restarted, click “Refresh” in your browser, and
then make sure that the Library Administration Menu appears normally.
If the Library Administration Menu appears normally, the upload is
complete.
When the firmware upload is finished, it is recommended to restart the
library.
If the Library Administration Menu does not appear normally, restart the
library again.
Caution
• Do not turn off the power of the AIT library while the firmware is being
updated.
• The Library Administration Menu cannot be operated while the firmware
is being updated.
Information Menu
In the Information Menu, information about the AIT library, the AIT drives and
the cartridges can be viewed.
The following items are in the Information Menu:
• Information
Displays information related to the AIT library and AIT drives.
•Inventory
Displays information related to the cartridges.
Information
In “Information”, the following information related to the AIT library and AIT
drives is displayed:
• Vendor ID
•Product ID
•Revision
•Serial number
Note
Information related to the AIT library and the AIT drives can also be viewed in
the Information Menu of the control panel.
1
In the Library Administration Menu, click “Information”. You can also
directly click “Information”, which is located above “Information”.
