SPX Cooling Technologies none Manual

A SERVICE OF

next previous

4

Preparation

The Marley MC Fluid Cooler purchased for this installation represents the

current state of the art in counterﬂow, forced draft ﬂuid cooler design. Ther-

mally and operationally, it is the most efﬁcient ﬂuid cooler of its class.

These instructions—as well as those offered separately on motors, fans,

ﬂoat valves, pumps, etc.—are intended to assure that the ﬂuid cooler

serves you properly for the maximum possible time. Since product warrant-

ability may well depend upon your actions, please read these instructions

thoroughly prior to operation.

If you have questions about the operation and/or maintenance of this

product, and you don’t ﬁnd the answers in this manual, please contact

your Marley sales representative. When writing for information, or when

ordering parts, please mention product serial number shown on the name-

plate located on the access door.

Safety First

The location and orientation of the ﬂuid cooler can affect the safety of those

responsible for installing, operating or maintaining the ﬂuid cooler. However,

since SPX Cooling Technologies does not determine the location or orienta-

tion of the ﬂuid cooler, we cannot be responsible for addressing those safety

issues that are affected by the ﬂuid cooler’s location or orientation.

WARNING

The following safety issues should be considered by those responsible

for designing the ﬂuid cooler installation.

• accesstoandfrommaintenanceaccessdoors

• thepossibleneedforladders(eitherportableorpermanent)to

gain access to the discharge level or maintenance access doors

• thepossibleneedforexternalaccessplatforms

• potentialaccessproblemsduetoobstructionssurroundingtheuid

cooler

• lockoutofmechanicalequipment

• thepossibleneedforsafetycagesaroundladders

• theneedtoavoidexposingmaintenancepersonneltothepotentially

unsafe environment inside the ﬂuid cooler

Warning