ENGLISH
ENGLISH-4
THE REAR PANEL
Wireless antenna
Factory Default Reset button
There are two ways to reset the router’s factory defaults:
1) Use the Factory Defaults function on System Tools -> Factory
Defaults page in the router’s Web-based Utility.
2) Use the Factory Default Reset button: First, turn off the
router’s power. Second, press and hold the default reset button
then turn on the router’s power, until the system LED lights up
(about 3 seconds). Last, release the reset button and wait for the
router to reboot.
WAN RJ45 port for connecting the router to a cable, DSL
modem, or Ethernet
Four LAN 10/100Mbps RJ45 ports for connecting the router to
the local PCs
Name Action Descri
tion
Not lit No
ower
Lit u
Power on
Lit u
The router is initialisin
Flashing
The router is working
ro
erl
Not lit
The router has a hardware
error
Not lit
There is no device linked to
the corres
ondin
ort
Lit up
There is a device linked to
the corresponding port but
no activit
Flashing
There is an active device
linked to the corresponding
ort
Not lit
The wireless radio funcion is
disabled
Flashing
The wireless radio funcion is
enabled
Pwr
Sys
Link / Act
WLAN
