A SERVICE OF

logo

Open as PDF
next previous
Yourmodelmaydiffer.
Yourmodelmaydiffer.
1
2
11
Basic Connection and Start-Up
1
Plug your UPS’s line cord into an electrical outlet.
YourUPSmustbeconnectedtoadedicatedcircuitofsufficient
amperage. Note, however, that select models may be fitted with
different plug types. Refer to the rating table on top of your UPS
for more details on each selectable operating voltage.
Quick Start Guide
STANDBY MODE LCD SCREEN
>PLUGiconON(confirmsINPUTPOWERstatus)
> Battery charge display (reports battery charge level)
>”OFF” refers to OUTPUT status (as indicated by the “OUT” icon)
> SPEAKER icon (Audible alarm status)
Once plugged in, the UPS will automatically power on into
STANDBYMODE.Thisprocesstakesapproximately15seconds
andrequiresnouserinputastheUPSrunsthroughabriefseries
of internal tests. Once complete, the UPS will power-on into
standby mode and report OFF on the LCD screen.
2
Plug your equipment into your UPS.
YourUPSisdesignedtosupportcomputerequipmentonly.Youwill
overload your UPS if you connect household appliances or laser
printerstotheUPS'soutlets.
13-03-138 93-3168-EN.indd 11 3/28/2013 1:05:07 PM