3
1
1
6
5
4
4
4
7 7
10
11
9
11
12
12
22
5 5
8 88 8
3 3
3
Features
1
L6-30 Output Receptacles: Accept direct plug-in connection of L6-30 equipment plugs.
2
Output Breakers (30 Amp): One double-pole circuit breaker provides Bypass for the parallel system to the load.
3
Parallel Cable Connectors: For UPS communication in parallel.
4
Maintenance Switch (100 Amp): Controls maintenance to the power module.
5
Utility Input Terminal Block: Use this terminal to connect your power module to utility power or to the transformer module.Unscrew and
remove the cover over the block for access.
6
Equipment Output Terminal Block (SUPDMB20KHW only): Use this terminal to connect your power module to your equipment or to the
transformer module. Unscrew and remove the cover over the block for access.
7
Output Breakers (20 Amp): One double-pole circuit breaker provides Bypass for the parallel system to the load.
8
IEC-320-C19 Output Receptacles: Accept direct plug-in connection of IEC-320-C19 equipment plugs.
9
PDU Connection Access Covers: Remove to make connections between the PDU and power modules.
10
PDU Input Terminal Block: Use these terminals to connect the PDU to the power module.
11
PDU Guidance Pegs: Found on the side of the PDU to help guide PDU installation placement. Used in conjunction with PDU placement guide
brackets (see “Mounting “ section for more details).
12
PDU Guidance Posts: Found on the back panel of the PDU to help guide PDU installation placement. See “Mounting” section for more details.
SUPDMB20K
SUPDMB20KHW
SUPDMB20KIEC
Back Panel
(applies to all 3 models)
