VX-800 OPERATING MANUAL
12
When you delete a Group or channel, “-SKIP-”
will appear on the LCD for one second after press-
ing the Soft key. To restore a particular channel
to your scanning list, press and hold in the Soft
key again for one second; “-STOP-” will appear
on the LCD for one second after pressing the Soft
key.
Call/Reset
This feature, if enabled, allows the user to change
the 3-digit Page Call code, used to call other simi-
larly-equipped stations. Press the Dealer-assigned
soft key, followed by the three digits represent-
ing the Page Call code of the station you wish to
call. Three tones will be heard after the last key is
pressed (the new code will now be transmitted).
The receiver squelch of the other station will be
opened, and you can begin communication.
Speed Dial
Your Dealer may have pre-programmed Auto-Dial
telephone number memories into your radio.
To dial a number, press the numbered key corre-
sponding to the Auto-Dial memory number list
provided by your Dealer while pressing the PTT
switch. Once the telephone number has begun
(you will hear the tones in the speaker), you can
release the PTT switch.
Emergency
The VX-800 includes an “Emergency” feature
which may be useful if you have someone moni-
toring on the same frequency as your transceiver’s
channel. For further details contact your nearest
dealer..
ADVANCED OPERATION
