Lock-out pad
A hidden LOCK-OUT pad is located in the center of
When the LOCK-OUT pad is touched twice within
the Control Pads. This pad lets you turn off the pro-
2 seconds, ‘I” will show in the digital display (for 2
gramming tone or lock-out the function of the Con-
seconds) and all control pad operations (except
trol Pads (except CANCEL).
CANCEL] and the programming tone will be
When the LOCK-OUT pad is pressed and held for
locked out. If a control -pad is touched while in
3 or more seconds, the programming tone will
LOCK-OUT, the display will show an ‘I” for 2 sec-
turn off. The tone will not sound when the pads are
onds. This shows you that LOCK-OUT is being used.
touched or when the door is opened. To turn the
To return the control pads and programming tone
programming tone back on, press and hold the
to full operation, touch the LOCK-OUT pad twice in
LOCK-OUT pad for 3 or more seconds.
2 seconds. The pads will work again.
To add a dish after starting
I. To be sure the added item is washed,
make sure the WASHING indicator is still
on.
2. To stop the dishwasher, unlatch the door
by pushing in the latch handle under the
control panel. Do not open the door until
the spray arms stop spinning. The DOOR
;F’Fp,indicator will flash and a tone will
4. Close the door. Do not latch it. Wait 30
seconds for air in the dishwasher to warm
up. This helps reduce the amount of
moisture that can come from the vent
when restarting the program.
5. Push in on the door until it latches. The dish-
washer will restart and continue the
program.
12
