This example shows a desired stop time of
2:30. This provides a cook time of 30 minutes
(the difference between the start and stop
times).
NOTE: If you do not set a stop time within
5 minutes, the display will return to the time
of day.
9. Push the Stat-t/Enter pad. The Delay Indica-
tor Light will light up in the display to indicate
that the oven is programmed to start at a
later time. The Start Time and Stop Time
Indicator Lights will flash.
NOTE: You can change a time setting after
pushing the Start/Enter pad without pushing
the StatVEnter pad again.
10. When the start time is reached, the Delay
Indicator Light will go off, a single tone will
sound and the display will count down the
baking/roasting time in minutes. The example
at right shows a baking/roasting time of
30 minutes (the difference between the stop
and start times).
11. When the baking/roasting time is completed,
the oven will turn off automatically, beep four
times, and “End” will show in the display. You
will also hear two tones once every minute
until you push the Off/Cancel pad.
NOTE: To disable the reminder tones, push
and hold the Timer Set pad for 4 seconds. To
reactivate the tones, repeat this procedure.
12. Turn both the Oven Selector and the Oven
Temperature Control Knob to OFF.
STiiRT STOP
TIME TIME
DELAY
To cancel the MEALTIMER” control setting:
l
Push the Off/Cancel pad to return the display to
the time of day.
22
