The electronic oven control
off1
Cancel
yd
Electronic
display
Increase/
decrease
pap
Timer Ciock Sior, &ok Clean boil Bake
On/Off pad tin4 time
pad
pad pad
pad
pad pad
Display/clock
l
When you first plug in the range,
a time
of day and “PF’ will appear in the tempera-
ture display. If, after you set the clock
(page 13) “PF’ again appears on the
display, your electricity was off for a while.
Reset the clock.
l
When you are not using the oven,
the
control is an accurate clock.
l
When you are using the oven or Minute
Timer,
the display will show times,
temperature settings and what command
pads have been pressed.
l
When showing the time of day,
the
display will show the hour and minutes.
l
When you are using the Minute Timer,
the display will show minutes and seconds
in the following sequence:
- For settings under one minute,
the
display will count down each second.
- For settings from l-10 minutes,
the
display will count down minutes and
seconds.
- For settings over 10 minutes,
the
display will count down hours and
minutes.
l
When you are using Cook Time and/or
Stop Time,
the display will show hours
and minutes.
12
Command pads
The command pads tell the oven what to do
and in what order. A few examples:
-Clock tells
the oven you are going to set
the clock.
-Off/Cancel
tells the oven to turn off.
-Increase/Decrease pads
change time or
temperature. Tap them briefly to change
time or temperature by a small amount.
Press and hold to change by a larger
amount.
Each command pad (except Off/Cancel)
has its own Indicator Light. The Indicator
Light comes on when you touch the com-
mand pad.
