A SERVICE OF

logo

SGD Wireless Commands
wlan.signal_noise
300
14245L-003 Rev. A EPL Programming Guide 12/16/13
wlan.signal_noise
Description This command returns the signal noise on the wireless network. Values above
40% represent a very significant noise, and radio communication is not reliable. For printer
support, see SGD Command Support on page 315.
Type getvar
This table identifies the command for this format:
Note • For details on SGD command structure, see Command Structure on page 250.
Commands Details
getvar
This command instructs the printer to return the current signal noise on the
wireless network.
Format: ! U1 getvar "wlan.signal_noise"
Example • In this example, the getvar result is the current signal_noise value.
! U1 getvar "wlan.signal_noise"