333
Print Meter for 2746e and G-Series
URL
12/16/13 EPL Programming Guide 14245L-003
URL
Read Print Odometers
Description Use this command to print or report (via the serial or USB interface) latest
active print odometer data stored in printer memory. Report printer usage for one or both of the
following:
• The current distance printed by the presently installed print head.
• The total distance printed by the printer.
Syntax URL[p
1
,p
2
,p
3
]
Parameters This table identifies the parameters for this format. Parameters are optional and
maybe entered and any order.
Parameters Details
No parameters
This is the default value. Prints both Head Life and Total Print
Distance report data strings.
p
1
= Report Method
(device)
Sends information back to the host via the serial port and the
last active bi-directional interface.
p = Printer
s = Serial
Default Value: s
p
2
= Units
m = Millimeters
i = Inches
p
3
= Read Meter
h = Head Life (distance)
t = Total Print Distance
Important • Do not use both the p
3
parameters,
h and t.
None = Default. Prints both head Life and Total Print
Distance report data strings. Do not use both the p
3
parameters, h and t.
