A SERVICE OF

logo

IES-5000 Series User’s Guide
42 Chapter 3 Hardware Installation and Connections
Figure 22 Installation Scenario A
Use the following procedure for this MDF installation scenario.
1 Connect the Telco-50 connector end of the cable to the Telco-50 connector labeled
USER.
2 Connect the wiring on the other end of the Telco-50 cable to the upper ports of the MDF
using a punch-down tool.
3 Connect the telephone wiring from each end-user’s DSL modem to the lower ports of the
MDF.
3.5.5.2 Installation Scenario B
Phone service is available. There is one MDF from which end-users CO connections are made
(see next figure). This installation scenario does not apply to G.SHDSL connections.
Figure 23 One MDF for End-user and CO Connections