Chapter 2 Hardware Installation and Connections
IES-5106M / IES-5112M / IES-6000M User’s Guide
23
Figure 11 Attaching Mounting Brackets to the IES-6000M
4 Position a mounting bracket (that is already attached to the main chassis) on one
side of the rack, lining up the screw holes on the bracket with the screw holes on
the side of the rack.
5 Use the screwdriver to install the screws through the mounting bracket holes into
the rack.
6 Repeat steps 4-5 to attach the second mounting bracket on the other side of the
rack.
2.2.3 Connecting the IES-5106M/IES-5112M Frame Ground
Refer to Chapter 5 on page 75 for the ground wire gauge.
• The IES-5106M/IES-5112M frame ground is on the upper right corner of the
front panel.
• The IES-5005ST, IES-5000ST or IES-5002ST frame ground is near the lower left
of the rear panel.
• Connect the frame grounds to a building’s protective earthing terminals using a
green-and-yellow frame ground wire.
Warning! Connect the frame ground before you connect any other
cables or wiring.
